tire shredding EPT recycle gear tire shredders rubber value
The EPT tire recycling EPT will be managed by the PLC, all the components will be method inside of of EPTs, there is True ZERO Air pollution. one labor, 1 engineer can function all the EPTs, no need to have to run the EPTs, just management the PLC. the EPTs can safeguard the EPTs, work the EPTs and keep the EPTs work efficiently.
Specification
one.Tire shredEPTEPT
The Rubber ShredEPTEPT adopt PLC automated manage system, with automatic reversal manage system in overload condition. Two-shaft tire crusher is EPTly made for previous tires with reduced pace and substantial torque to minimize sounds and EPT intake.
The blade of the shredEPTis manufactured of large quality metal and subjected to Bodycote warmth remedy to accomplish the very best crushing functionality.The shredEPTis effortless to disassemble and adjust cutter blade and suited for tearing huge, further thick and difficult resources.The thickness range of the crushing blade is 25mm-152mm according to the tire sort,output and final merchandise. The grinEPTcan method OTR tires,big truck tires,automobile tires and so on at the speed of one-30tons whithin one hour.
| Design | Enter size | Output size | Cappacity | Motor | Blades quantity | Dimensions | Excess weight |
| TS-800 | 800mm | 50*50mm | 1-2T/h | 2*22kw | 16pcs | 4*two.six*3.2m | 8T |
| TS-1200 | 1200mm | 60*60mm | 3-5T/h | 2*37kw | 20pcs | 4.eight*two.eight*three.5m | 14T |
| TS-1600 | 1600mm | fifty-150mm | six-8T/h | two*45kw | 16-30pcs | five*2*three.4m | 18T |
| TS-1800 | 1800mm | fifty-150mm | 7-10T/h | 2*55kw | 20-24pcs | five.6*two*three.4m | 23T |
| TS-2000 | 2000mm | seventy five-200mm | ten-15T/h | 2*75kw | 20-30pcs | 6*2.four*4m | 36T |
| TS-2400 | 2400mm | a hundred-200mm | 20-30T/h | 2*110kw | 16-24pcs | seven.4*3.two*five.2m | 56T |
two.Rasper
EPT tire shredding system is designed to generate up to six tons for each hour of wire free of charge rubber mulch.This program makes up to a ninety nine% wire free of charge chip ranging in measurement amongst twelve-25mm based on the wanted size.Following processing,the metal is eliminated by our magnetic separation system.At this position,the wire free of charge rubber chips are completely ready to be colored and utilized for landscaping mulch and the metal is prepared to be baled and bought to smelters.
| Rasper | Motor | EPT | Potential | Dimensions | Weight | Chopping chamber | Ultimate product |
| R45 | Siemens | 45KW | 300-500kg/H | 1.four*one.2*two.3m | 1700kg | 450*600mm | 10-30mm |
| R55 | Siemens | 55KW | 500-700kg/H | 1.7*1.seven*2.3m | 1850kg | 450*800mm | ten-30mm |
| R75 | Siemens | 75KW | 700-1T/H | two*two*four.1m | 3500kg | 550*800mm | ten-30mm |
| R90 | Siemens | 90KW | 1-one.5T/H | 2.one*two.1*four.1m | 4200kg | 550*1000mm | ten-30mm |
| R132 | Siemens | 132KW | 1.5-3T/H | two*2.5*four.1m | 6100kg | 742*1200mm | 10-30mm |
| R315 | Siemens | 315KW | 3-6T/H | six.2*2.one*three.6m | 12400kg | 697*1562mm | 10-30mm |
3.Granulator EPT
Waste Tire Recycling Rubber Granule Creating EPT is adopting physical recycling strategy and is created to grind the rubber mulch from the rasper into small granules as good as 1-6mm. The granules are screened and re-circulated right up until the preferred measurement is attained. This Fully-Automatic Tyre Recycling Line managing in normal temperature, no need to include any other chemical substances, no air pollution to the atmosphere. This is the greatest way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Ability | three hundred-500kg/h | 500-800kg/h | 800-1500kg/h |
| Proportions | 1.eight*1.six*two.4m | 1.8*1.9*2.4m | two.two*two.three*3m |
| Closing merchandise | 1-6mm | 1-6mm | 1-6mm |
4.Miller
Rubber powEPTis the closing consequence of ambient tire recycling.At this phase,crumb rubber is ground down into a cleanse powEPTform with practically all metal and fiber taken out.Rubber powEPThas several secondary employs from injection molding goods,coatings,roofing supplies and numerous asphaltapplications.
Rubber powEPTis usually found in 40-74 microns(.forty-.74mm) in measurement.This micron measurement metarial has the advantage of getting included into new or eXiHu (West Lake) Dis.sting formulations for numerous polymers and finished items.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Enter merchandise | Weighty responsibility truck tyres to bicycle tyres | |||
| Enter dimension | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output dimensions | shred to 30-a hundred and twenty mesh rubber powder | |||
| Potential | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Overall Kw | 680-760kw | 516-556kw | 347-372kw | one hundred seventy-190kw |
Mob 151366 0571 6
FAQ:
Q1,Are you a manufacturing unit or a investing organization?
A. We are a maker with 30 several years production knowledge in tire recycling EPT. We have export license, we can supply you the manufacturing facility charges.
Q2. Can you ensure the potential as you described ?
A. Definitely yes,except that,we also supply 3-5years warranty.
Q3, are you positive the closing rubber powEPTcan be totally clean out of wire steel or nylon ?
A. The closing powEPTpurity can achieve ninety nine.nine%. we have magnetic separator which can different the wire metal from the rubber powder.
