Waste Tire Recycle Line/Rubber Reducing EPT
Waste tire recycle line/rubber cutting EPT is to crush squander tires into rubber powEPTin various dimensions. The final rubber powEPTis with purity of ninety nine.ninety nine%, can be utilised to make rubber tiles, rubber mat, asphalt, watertight substance, filler of synthetic grass.
The working procedure of waste tire recycle line/rubber cutting EPT:
squander tire—tire circle cutter—tire strip cutter—tire slice cutter—rims separator—rubber crusher—magnetic separator—fiber separator—rubber powder
Specification of waste tire recycle line/rubber chopping EPT:
1. Tire circle cutter is utilized to reduce and open up the joint of tire’s side and prime.
|
Name |
Motor |
Excess weight |
Ability |
Tire specification |
|
Tire circle cutter |
4kw |
650kg |
40pcs/h |
650-1200mm (Each strengthened and nylon tires) |
2. Rims separator is used to different the steel rims around the tire to avoid the damage to the EPT.
|
Name |
Motor EPT |
Fat |
Ability |
|
Rims separator |
seven.5kw |
1300kg |
100pcs/h |
three. Tire strip cutter is utilised to reduce the tire cirlce into strips 5×8 cm .
|
Title |
Motor EPT |
Excess weight |
Capacity |
Slicing dimension |
|
Tire strip cutter |
4kw |
850kg |
two.5t/h |
5x8cm |
four. Tire slice cutter is utilized to cut the strips into small chunks about 3.5 cubic centimeter.
|
Identify |
Motor EPT |
Fat |
Capability |
Chopping measurement |
|
Tire slice cutter |
4kw |
800kg |
.8t/h |
3x5x8cm |
five. Rubber crusher is to crush the rubber blocks into powEPTin different measurements with purity of 99.ninety nine%.
| Product | Ability | Drum diameter | Drum duration | Entrance roll linear | Roll pace ratio | Max roller spacing | Motor EPT |
| XKP-350 | 3ton | 300mm | 500mm | 26.2m/min | 1:two.5 | 8mm | 30kw |
| XKP-400 | 6ton | 400mm | 600mm | 34.5m/min | 1:2.5 | 8mm | 45kw |
| XKP-450 | 8ton | 450mm | 760mm | 38.0m/min | one:two.five | 8mm | 55kw/75kw |
| XKP-560 | 10ton | 560mm | 800mm | 38.6m/min | one:two.five | 8mm | 75kw/90kw |
| XKP-560D | 20ton | 560mm | 1000mm | forty two.5m/min | 1:two.5 | 8mm | 132kw/160kw |
Rewards of our rubber crusher EPT:
one. Crusher roller pace ratio: Ours is one: 2.5, whilst the outdated type roller velocity ratio is one: one.38.
2. Roller construction: Our two rollers are the two grooved, which boost the friction and then increase the output, even though the aged variety is a single with groove, and the other is clean.
three. Roller material: The roller is made by Welding use resistant alloy supplies, 5Cr6MnMo. We can offer you three several years guarantee of the roller. Whilst the outdated types EPT use solid iron to make the rollers, extremely easy to crack or crack in two .
4. EPT characteristic: Our EPT is vitality preserving 1/three. For illustration, making 1T powder, our EPT electrical power intake is only one hundred fifty deg, while their electrical power use is about 250- 280 deg in creating 1T powder.
five. Bearing: Our EPT use rolling bearing, there are 8 pieces bearing within, even though the previous EPT use the slide bearings ( bush) , which is not as good as ours.
FAQ:
Q1,Are you a factory or a buying and selling organization?
A. We are a manufacturer with 30 years manufacturing knowledge in tire recycling EPT and nail generating EPTs. We have export license, we can supply you the manufacturing facility rates.
Q2. Can you ensure the potential as you pointed out ?
A. Absolutely sure, the grooved two rollers are EPTly made to enhance the output and ensure the operating successful.
Q3, are you positive the closing rubber powEPTcan be fully thoroughly clean out of wire metal or nylon ?
A. The last powEPTpurity can achieve 99.nine%. we have magnetic separator which can different the wire metal from the rubber powder.
